WIRE Line Plugs

Wire Line Plugs

Placed in tubing string to hold a column of fluid from draining back into the well formation.



The BT WJ consists of six components:
1. Fishneck
2. Shear Disc
3. Plunger
4. Cage
5. Packing Sub
6. Collet


BT WJ valves are generally placed in a well when there is a need for fluid to be
retained in the wellbore and not to be reabsorbed back into the formation of a
well, a good example of this would be above a submersible pump


wireline plug1


Install BT WJ Valve into desired jar down running tool and lower into wellbore
to desired depth, jar packing into nipple and seat no-go, jar down to shear off
and remove toolstring from wellbore.

Pulling procedure

Install equalizing prong into desired jar up pulling tool and lower into wellbore
to top of the BT WJ Valve and pierce the equalizing plunger, wait for tubing to
equalize, pull from sealbore and remove toolstring from the wellbore.

for more details please see the attached file pdf-icon

If you are looking for a high quality services?